en Fender 5F6A 4×10″

Updated on May 4, 2021 | 27 Views all
0 on May 4, 2021

finished the chassis months ago. but my favorite cabinet builder had to take care of someone for a while. then I got the chance to put the chassis, speakers, and the cabinet together last week. I prefer 1×15″ setup, but this stock setup is also great of course

 

  • Liked by
Reply

Be the first to post a comment.

Loading more replies
  • en a friend’s beautiful Les Paul

  • all the black plastic parts have changed with vintage correct white ones. this Joe Bonamassa burst #70 has beautiful top and dark back with ’59 profile neck and Burstbucker #2 and #3. the orignal 50’s burst Les Paul guitars mostly had 7.5k to 8.4k pickups and many of them had hotter ones on the neck position.

    Gibon’s burstbucker was made after the original PAF pickups which had unbalanced bobbins. I’d put #3 on the neck and #2 on the bridge. personally the best PAF replica was Timbucker from Tim white I got at 2003 with my Brazilian freboard 59 historic. and, at the time a few friends on Lespaulforum.com tried Seymour Duncan Custmop Shop PAF replicas and it was a great pleasure to listen them.

    The same Duncan Custom shop PAF pickups are coming for this Les paul. and I believe he’d love them over burstbucker pickups

    more vintage correct parts like truss rod cover and square jack plate are coming as well.

    This Pin was discovered by HyungSub Kim. Discover (and save!) your own Pins on Pinterest.

     

     

    Load More...
  • en LSD – Audio (Official Video) ft. Labrinth, Sia, Diplo

  • Load More...
  • en Yokomo CVD bones

  • This post would be a help. but it seems impossible to get them unless you guys push MIP to make them again.

    Yokomo YZ10, Works, and 870C universal drives info

    it’s the basic info for Yokomo CVD bones
    ’94 YZ10 front CVD bone 84mm
    ’94 YZ10 rear CVD bone 79mm
    MX4 rear CVD bone 79mm

    Kysho RB5/RB6 70mm CVD bones work for 870C F/R

    MX4 rear bone works with ’94 YZ10 rear. and, Works F/R
    ’94 YZ10 rear bone works with Works F/R. and, for 870C front wide setup
    Bj4 front bone doesn’t work for Yokomo diff cups

    ’94 YZ10 front

     

    from the top, MX4 Rear / ’94 YZ10 Rear / Jconcpets BJ4 front.

    the length are identical to each other. but the head pins are not. I’ve tried more CVD bones from AE and Losi. and all the US brand CVD bones have bigger head pins which don’t fit Yokomo diff cups

    While the length is identical, Bj4 CVD bone don’t work for Yokomo diff cups

     

    ’94 yz10 cvd bones go deep inside of the diff

     

    MX4 bones have longer head pins. it’s fine except for 870C

     

     

    870C front wide setup with ’94 YZ10 CVD
     
     
    Load More...
  • en Yokomo ’95 YZ10 W.C.S Aka Pavidis parts list

  • I made this list from Asso_man!’s RC10talk thread a couple of years ago. and just noticed the file I uploaded has gone somwhere.

    Yokomo YZ10 W.C.S part list thread on RC10talk

     

    the scanned images are here

    Yokomo YZ10 Pavidis Part list #1 & #2

     

     

     

    Load More...
  • en fender factory tour 1959

  •  

    Load More...
  • en Pickguard on Joe Bonamassa signature Burst

  • I believe Gibson and Wildwood put the same black plastic parts from his Custom Shop Goldtop Les Paul. while the plastic parts made after his original. the pickguard is different to all the Gibson’s like pre 2009 historic, post 2009 historic, and Gibson US version.

    and, finally found the right one from Creamtone. they sent me their Absolute Vintage pickguard template. and every single detail is same except for the gap they made after the original 50’s pickguard.

    I’ll update after we try this from Creamtone later

     

    Load More...
  • en Question to the Slowbean community. (Stone / rock processing)

  • Hi community, since a long time I’m pondering about two topics that interest me. Stones / rocks and their industrial processing. If I want to cut rocks or slice stones in small pieces I have to use large machines, the energy consumption of such stone cutting machine is way too high for somebody who would just start to cut / slice rock. So, my question is: Do you have any ideas, thoughts or know about eco-friendly techologies which are energy efficient for cutting rocks into small slices? Every input regarding this topic is welcome.

    Load More...
  • en Fender Princeton AA964 Blackface from ’64 or ’65

  • haven’t checked the serial nubmber. it just looks came from between 1964 to 1965. someone added an extra diode on the original one. but the original diode works fine without it. more than one component have replaced at some point.

    the output level is too low and I guess it’s the filiter caps. it has 20+20+20+20uf 450v multi cap.

     

    Load More...
  • en Multifandom | Can’t Hold Us

  • THE GIRL THAT SAY “HELLO” AT 00:03 IS FROM “GOTHAM” ● HD IS BETTER ; That remix is fuck I needed to edit it, sorry the black border more gave a charm -q ‘ Im…
    Load More...
  • en a painting I came across

  • 1 Likes, 0 Comments – Anita Ekman (@anitaekmanartist) on Instagram: “Pintura de luz : Dona Quixote de la mancha.”

     

    Load More...